Audi A4: Driving information
Audi A4 (B9) 2016-2026 Owner's Manual / Assist systems / Driving information
READ NEXT:
Speed warning system
Description
Applies to: vehicles with speed warning system
The speed warning system helps the driver to
stay below a specified maximum speed. A warning
threshold can be set in the MMI for this purpo
Camera-based traffic sign recognition
Description
Applies to: vehicles with camera-based traffic sign recognition
Fig. 104 Instrument cluster: traffic sign recognition
The traffic sign recognition shows the traffic
signs detected by th
Traffic light information
Description
Applies to: vehicles with traffic light information
Fig. 105 Instrument cluster: traffic light information display
The traffic light information gives you a speed
recommendation in orde
SEE MORE:
Need for Axle Alignment, Evaluating
A wheel alignment is necessary if:
Vehicle shows handling problems.
Involved in an accident.
If axle components were removed and installed or replaced.
Tire wear patterns are uneven.
After REMOVING and REINSTALLING components.
1) When the subframe crossbrace
was secured with the locating p
Clamp on Triple Roller Joint and Outer Joint, Tensioning
Note
Depending on the version of the clamp, use the following
tools:
Special tools and workshop equipment required
Torque Wrench 1331 5-50Nm -VAG1331-
Clamping Pliers -VAG1682A-
Locking Pliers -VAS6199-
Tension the Stainless Steel Clamp using the -VAG1682A-.
- Attach the -VAG1682-
© 2019-2026 Copyright www.audia4b9.com
