Audi A4: Refrigerant Circuit
Audi A4 (B9) 2016-2026 Service Manual / Heating, Ventilation & Air Conditioning / Refrigerant Circuit
- A/C System Repair Information
- Using Service Station
- Refrigerant Circuit, Flushing with Compressed Air and Nitrogen
- Refrigerant Circuit, Cleaning (Flushing), with Refrigerant R134a
- Refrigerant Circuit, Determining Leaks
READ NEXT:
A/C System Repair Information
Air conditioning systems designed for refrigerant R12 are
only to be filled with refrigerant R134a if certain requirements
are fulfilled. Refer to
→ Chapter "Refrigerant Circuit, Convertin
General Information
Vehicles with a high-voltage system (hybrid vehicles)
Extremely Dangerous Due to High-Voltage
The high-voltage system is under high-voltage. Death or serious
bodily injury by electric shock.
- I
SEE MORE:
Hydraulic Pressure Sensor 1 -G545- and Hydraulic Pressure Sensor 2 -G546-,
Removing and Installing
Note
The Mechatronic remains installed.
WARNING
The system is under pressure.
The electronic ATF pump must be deactivated every
time before opening the transmission, and the hydraulic
pressure reservoir is drained.
Refer to
→ Chapter "ATF Pump, Deactivating and Draining
Antenna Amplifier, Removing and Installing
Antenna Amplifier -R24-, Removing and Installing, Sedan
The Antenna Amplifier -R24- is located on the upper right of
the D-pillar.
Removing
- Turn off the ignition and all electrical equipment and
remove the ignition key.
- Remove the D-pillar trim panel. Refer to
→ Body Interior;
© 2019-2026 Copyright www.audia4b9.com
