Audi A4 Owners & Service Manuals

Audi A4 (B9) 2016-2025 Service Manual

Audi A4 (B9) 2016-2025 Service Manual

Service Manual for fith generation Audi A4 (B9). This service manual is provided by a manufacturer explaining how to use, maintain, troubleshoot, and repair your car. Here is information about 4-Cylinder Direct Injection 2.0L 4V TFSI Engine Disassembly, Inspect and Reassemble, 7-Speed Dual Clutch Transmission (0CJ, 0CK, 0CL) technical data, repair Information. Also important data about Suspension, Wheels, Tires, Wheel Alignment, Steering, Heating, Ventilation & Air Conditioning and etc...

READ NEXT:

 Body

 Body Exterior

 General, Technical data

Safety Precautions Safety Precautions when Working on Vehicles with Start/Stop System There is a risk of injury due to the engine starting unexpectedly. The engine can start unexpectedly on vehicles

SEE MORE:

 Stabilizer Bar

Overview - Stabilizer Bar 1 - Bolt 25 Nm + 90º Replace after removing Tighten in the curb weight position. Refer to → Chapter "Wheel Bearing in Curb Weight Position, Lifting Vehicles with Coil Spring". Tighten alternating in stages 2 - Clamp 3 - Stabili

 Cooling system

Coolant The engine cooling system is filled with a mixture of purified water and coolant additive at the factory. This coolant must not be not changed. The coolant level is monitored using the indicator light. However, you should occasionally check the coolant level. Messages The following messag

© 2019-2025 Copyright www.audia4b9.com