Audi A4: 7-Speed Dual Clutch Transmission 0CJ, 0CK, 0CL
Audi A4 (B9) 2016-2026 Service Manual / Transmission / 7-Speed Dual Clutch Transmission 0CJ, 0CK, 0CL
- General, Technical data
- Repair Information
- Overview - Transmission
- Controls, Housing
- Rear Final Drive, Differential
READ NEXT:
General, Technical data
Technical Data
Identification
The following details can be found on the transmission
housing -arrows-:
Codes
Serial Number
Production Date
Capacities
Safety Precautions
General Safety Precauti
Repair Information
Guidelines for Clean Working Conditions
Thoroughly clean connection points and their surrounding
areas with engine or brake cleaner before loosening and allow
the cleaned connection points to dry
Overview - Transmission
1 - Rear Final Drive
Only for AWD
Removing and installing. Refer to
→ Rear Final Drive; Rep. Gr.39; Final Drive; Final Drive, Removing and
Installing.
2 - D
SEE MORE:
Overview - Lower Control Arm and Ball Joint
1 - Wheel Bearing Housing Side Bonded Rubber Bushing
Replacing. Refer to
→ Chapter "Control Arm Ball Bearing, Replacing, Wheel Bearing Housing
Side".
2 - Bolt
Replace after removing
3 - Subframe Side Bonded Rubber Bushing
Replacing. Refer to
→
Axle Alignment Information
Wheel alignment must only performed using VW/Audi-approved
alignment equipment.
Each time wheels are aligned, both front and rear wheels
must be aligned. Otherwise, the correct driving handling of the
vehicle cannot be ensured.
Note
Axle alignment should not be performed until the vehic
© 2019-2026 Copyright www.audia4b9.com
