Audi A4: Warnings when Working on Vehicles with High Voltage System
Vehicles with a High-Voltage System (Hybrid Vehicles)
Working on Vehicles with High-Voltage System (Hybrid Vehicles)
Extremely Dangerous Due to High-Voltage
The high-voltage system is under high-voltage. Death or serious bodily injury by electric shock.
- Individuals with electronic/medical life- and health sustaining machines in or on their person cannot perform any work on high-voltage systems. Life- and health sustaining machines are for example pain killer pumps, implanted defibrillators, pacemakers, insulin pumps, and hearing aids.
- Have the high-voltage system de-energized by a qualified person.
There is a Risk of Injury from the Engine Starting Unexpectedly
On electric - hybrid vehicles an active ready mode is difficult to identify. Parts of the body can be clamped or pulled.
- Turn off the ignition.
- Place the ignition key outside of the vehicle interior.
Risk of Damaging the High-Voltage Cables
Misuse can damage the insulation of high-voltage cables or high-voltage connectors.
- Never support objects on the high-voltage cables and the high-voltage connectors.
- Never support tools on the high-voltage cables and the high-voltage connectors.
- Never sharply bend or kink the high-voltage cables.
- When connecting pay attention to the coding of the high-voltage connectors.
Performing a Visual Inspection of Damage to High Voltage Components and Cables
Extremely Dangerous Due to High-Voltage
The high-voltage system is under high-voltage. Electrocution can cause death or very serious personal injury from damages high-voltage components and high-voltage cables.
- Perform a visual inspection of the high-voltage components and the high-voltage cables.
- Never use tools that are for cutting, deformed, or sharp edged.
- Never use welding, soldering, thermal adhesive or hot air.
READ NEXT:
Introduction
The purpose of this repair manual is to provide service
advisors and technicians with the basic knowledge needed to
ensure professional and competent procedures.
Note
Only the careful study
A/C Technology Basic Principles
Physical Principles
The four known states of water also apply to air
conditioning system refrigerants.
1 - Gaseous (invisible)
2 - Vapor
3 - Liquid
4 - Solid
SEE MORE:
A/C Technology Basic Principles
Physical Principles
The four known states of water also apply to air
conditioning system refrigerants.
1 - Gaseous (invisible)
2 - Vapor
3 - Liquid
4 - Solid
When water is heated in a container (heat absorption), water
vapor can be seen to rise. If the vapo
Overview - Wheel Bearing
Overview - Wheel Bearing, FWD
1 - Wheel Bearing Unit
Removing and installing. Refer to
→ Chapter "Wheel Bearing Unit, Removing and Installing, FWD".
Handling the wheel bearing. Refer to
→ Fig. "Wheel Bearing, Handling".
2 - Front Seal
3 - Wheel Bear
