Trailer Hitch Socket, Removing and Installing - Version 1
Removing
- Turn off the ignition and remove the key.
- Remove the bolts -arrows-.
- Detach the socket from the retaining plate.
Socket with Rear Fog Lamp Shut-Off Contact Switch -F216-:
- Remove harness connector -2-
for
1 - Clamp
Replace after removing
Tensioning. Refer to
→ Chapter "Clamp on Triple Roller Joint and Outer Joint, Tensioning".
2 - CV Boot
If the drive axle has a peened triple roller joint, then the triple
roller joint has an adapter installed
The CV boot must fit