Outer CV Joint, Removing
- Clamp the drive axle in a vise with protective covers.
- Open both clamps and remove the CV boot from the outer
joint.
- Drive out the CV joint from the drive axle with a copper or
brass mandrel -A- on the inner
ring.
- Remove joint and CV boot.
Out
Starting to drive, stopping, and parking
Starting from a stop
Press and hold the brake pedal.
Start the engine.
Select "D" or "R".
Release the parking brake.
Release the brake pedal. The vehicle may roll.
Press the accelerator pedal to accelerate.
Securing the vehicle against rolling
Secure