Audi A4: During a phone call
Applies to: vehicles with telephone
Depending on your mobile device and the type of connection, the following options may be available during a call:
- End call
- Mute
Sending a tone sequence
Press Numbers. You can enter tone sequences (DTMF) and send them to the other party on the call.
Hold
Puts the current call on hold. To resume the call, press Resume.
Answering an incoming call
One of these options will be available, depending on the mobile phone service provider:
- Answer: the current phone call will be put on hold. The incoming call will be answered.
- Replace: the active call will be replaced with the incoming call.
Declining an incoming call
If you select Decline, the incoming call will be declined.
Conference
Requirement: two phone calls must be in progress.
Depending on your mobile phone service provider, you can add a call on hold and up to five active callers to a conference call.
Swap call
Requirement: two phone calls must be in progress.
You can alternate between two phone calls.
Additional call options
Press More.
Depending on the mobile device being used and the type of connection, the following options may be available:
Transfer call to mobile device
Transfer the current call to your mobile device or Bluetooth headset*.
Switch to hands-free
Transfer the current call from your mobile device to the MMI.
Add call
You can start a new call. The current call will be put on hold.
Remove conference member
You can remove conference call members individually when a conference call is active.
Microph. input
You can adjust the input level of the microphone using the slider.
Tips
The call waiting function must be activated in your mobile device to be alerted about an incoming call during an active call.
Making an emergency call
Applies to: vehicles with telephone
Requirement: a mobile device must be connected to the MMI.
- Applies to: MMI: Select on the home screen: PHONE > Dial phone number > the local emergency call number (for example, 911) > Dial.
WARNING
- Because your phone works with radio signals, a connection cannot be guaranteed under all circumstances. Do not rely on only your phone when it comes to essential communication (such as during a medical emergency).
- Always follow the instructions given by the emergency personnel during an emergency call and only end the call when they instruct you to do so.
READ NEXT:
Settings
Telephone settings
Applies to: vehicles with telephone
Applies to: MMI: Select on the home screen:
PHONE > .
The following options may be possible, depending
on your mobile device:
Decline wi
Messages
Text messages
Applies to: vehicles with telephone
Requirement: your mobile device must be connected
to the MMI via Bluetooth Message Access
Profile (Bluetooth MAP).
Applies to: MMI: Select on the ho
SEE MORE:
System settings
Introduction
General settings are described in this chapter.
You can find specific settings in the chapters
about those settings. The available settings depend
on the vehicle equipment.
Date and time
Applies to: MMI: Select on the home screen:
SETTINGS > General > Date & time.
Possibl
Leak Detection on Refrigerant Circuit Using Leak Detection Kit -VAS6201A-
Vehicles with a High Voltage System (Hybrid Vehicles)
Read and follow all of the supplemental warnings for all
work performed on vehicles with the high voltage system. Refer
to
→ Chapter "Warnings when Working on Vehicles with High Voltage
System" and
→ Electrical Equipment;
