Audi A4: Entering a destination
Intelligent search for navigation destinations
Applies to: vehicles with navigation system
Using the intelligent search, you can enter the data for a navigation destination in any order all at once (for example, 5th Avenue New York).
Likewise, you can search for points of interest, contacts, previous destinations, or favorites in order to navigate to the desired destination.
Opening a menu
- Applies to: MMI: Select on the home screen:
NAVIGATION >
.png)
.
Intelligent search
- Enter one or more search terms into the input field.
- Press on the desired destination in the results list. The Details menu will be displayed.
- Press Start. Route guidance will be activated and the map will be displayed fig. 143.
Online Points of Interest
- Searching for points of interest: enter the name of a POI.
- Select: a symbol for a POI category (such as
.png)
>a POI, or - To display all categories and search for a POI,
select:
.png)
> a category (such as
restaurants) >
a POI.
Change search area
Requirement: route guidance must be active.
- Applies to: MMI: Select on the home screen:
NAVIGATION >
.png)
. - To change the search area, press
.png)
repeatedly
until the desired search area is selected.
Online search1)
Applies to: vehicles with navigation system and online search
You can use the results from a search engine provider to find a navigation destination.
Requirement: the MMI must be connected to the Internet.
- Applies to: MMI: Select on the home screen:
NAVIGATION
.png)
- Enter one or more search terms into the input field.
- The search engine provider shows suggestions
.png)
to narrow down the search. - Press on suggestions, if available, until the desired
destination appears in the results list. If
necessary, use one finger to swipe upward or
downward until the suggestions
.png)
or destinations
.png)
appear. - Press on the desired destination
.png)
. The Details
menu will be displayed. - Press Start.
Tips
- The MMI input suggestions depend on the last navigated destinations.
- The navigation system always searches for the fastest route. You can have alternative routes displayed if necessary.
- If the destination cannot be found, it may
not be stored in the navigation database.
Check the spelling of the term that was searched or check the search area.
- Distances to points of interest are displayed as a straight-line distance from your current location. The actual distance from your current location to the point of interest is updated automatically. The list of points of interest that were found is not resorted when this happens.
READ NEXT:
Select destination
Applies to: vehicles with navigation system
Fig. 141 Menu: select destination
Opening a menu
Applies to: MMI: Press NAVIGATION on the
home screen.
If the map is displayed, press
(1)
fig. 140.
Map
Map function
Applies to: vehicles with navigation system
Fig. 143 Active route guidance
Fig. 144 Marked map object
Opening the map
Applies to: MMI: Press NAVIGATION on the
home screen.
If necess
Alternative routes
Applies to: vehicles with navigation system
Fig. 146 Alternative routes in the overview map
Opening alternative routes
Requirement: route guidance must be started
and the map must be displayed
Pres
SEE MORE:
Refrigerant Circuit, Charging with Service Station
Note
The entire refrigerant charge can be added to either the
high or low pressure side. Refer to
→ Chapter "Refrigerant R134a Capacities, Refrigerant Oil and
Approved Refrigerant Oils".
The work procedure is always to be performed as described in
the operating instructions for
General Information
Chassis
Steering
Tire Types
For general information on wheel/tire combinations, winter tires, snow
chains, and recommended tire manufacturers, refer to
→Wheel and Tire Guide; Rep. Gr.44
Drive Axle General Information
Apply a thin coat of assembly paste to the splines on the
outer joint b
