Adjusting Buffer, Removing and Installing, Sedan
Body Adjusting Buffer
Removing
- Turn the adjusting buffer -1-
counter-clockwise -arrow- to
remove.
- Remove the adjusting buffer locking mechanism
-2- from the threaded pin.
Installing
Install in reverse order of removal and note the fo
Overview - Windshield
1 -
Windshield
Removing and installing. Refer to
→ Chapter "Windshield, Removing and Installing".
Distance to roof: Dimension -c- = 2.5 mm
Distance to A-pillars: Dimension -e- =
greater than 3 mm; center if necessary
2 -
Adhesive Bead
Observe