Audi A4: Switches and Sensors on Refrigerant Circuit and Connections
Audi A4 (B9) 2016-2026 Service Manual / Heating, Ventilation & Air Conditioning / Refrigerant Circuit General Information / Switches and Sensors on Refrigerant Circuit and Connections
READ NEXT:
A/C Refrigerant High Pressure Switch -F23-
Note
Switch pressures, removing and installing switches as well
as switch arrangement and version. Refer to vehicle specific
refrigerant circuit
→ Heating, Ventilation and Air Condit
A/C Pressure Switch -F129-
Note
Switch pressures, removing and installing switches as well
as switch arrangement and version. Refer to vehicle specific
refrigerant circuit
→ Heating, Ventilation and Air Condit
A/C Pressure/Temperature Sensor
There are different versions of this sensor with different
functions and with different names. For exact name, allocation
and notes doe the respective function, refer to
→ Heating, Ventilatio
SEE MORE:
Repairing a Wire 0.35 mm 2 or Greater with
Individual Crimp Connector
Procedure
- Free up the wire to be repaired approximately 20 cm on both
sides of the repair point.
Caution
Risk of damaging the electrical wires.
Expose wrapped wiring harnesses carefully.
- If necessary, removing the wiring harness wrapping using a
knife.
- Cut out the dam
Dual Clutch, Removing and Installing
Special tools and workshop equipment required
Shop Crane -VAS6100-
Puller - Input Shaft -T40050-
Pressure Stand -T40099-
Guide Pins - Gearbox -T40288-
Engine Support Bridge - Additional Hooks (2 pc.) -10-222A/2-
Removing
Secure the transmission on the Engine And Transmission
Holder -VAS609
© 2019-2026 Copyright www.audia4b9.com
