Audi A4: Using the telephone
Accessing the telephone functions
Applies to: vehicles with telephone
Fig. 136 Center display: selection menu
Requirement: a mobile device must be connected
to the MMI.
- Applies to: MMI: Select on the home screen:
PHONE.
Possible telephone functions:
- Search
- Call list
- Favorites
- Contacts
- Voicemail
- Dial phone number
- Switch telephones
Managing call lists
Applies to: vehicles with telephone
Fig. 137 Center display: call list
Opening call lists using the MMI
- Applies to: MMI: Select on the home screen:
PHONE > Call list.
Opening call lists using the multifunction
steering wheel
- Select in the instrument cluster: Telephone tab
> button > Call list.
Possible call list symbols:
- Missed calls
- Dialed numbers
- Accepted calls
- Editing a telephone number
- Display business card
- Number of interactions with a contact
If more than one interaction with a contact or
number has taken place, the last one is displayed
in the form of an arrow (1), (2), or (3).
Call list options
Press and hold a contact or a phone number in
the list until the Options menu appears.
Depending on the vehicle equipment and your
mobile phone, the following options may be
available:
- Store as favorite
- Send text message
- Send e-mail
Edit number
Edit a phone number before dialing it.
Show history
Requirement: you must have had more than one
interaction with a contact.
All interactions with a contact or a number are
displayed.
READ NEXT:
Applies to: vehicles with telephone
You can store contacts for all connected mobile
devices as shortcuts in the favorites list.
Selecting favorites using the MMI
Applies to: MMI: Select on the home
Applies to: vehicles with telephone
Depending on your mobile device and the type of
connection, the following options may be available
during a call:
End call
Mute
Sending a tone sequence
Press Nu
Telephone settings
Applies to: vehicles with telephone
Applies to: MMI: Select on the home screen:
PHONE > .
The following options may be possible, depending
on your mobile device:
Decline wi
SEE MORE:
Air Intake Grille, Removing and Installing, Center
Removing
- Remove the front bumper cover end plate. Refer to
→ Chapter "Front Bumper Cover End Plate, Removing and
Installing".
- Free up the wiring harness -3-.
- Remove the bolts -2-.
- Release the retainers in the dire
WARNING
After every removal and installation of the Airbag
Control Module -J234-, the "inertial sensor basic
setting" must be performed.
If the Airbag Control Module -J234- is replaced with a
new part, the basic setting is performed when
implementing the "15 - Replace airbag control