Park the vehicle as far as possible from moving
traffic in the event of a breakdown. In the event
of a flat tire, park the vehicle on a level surface.
If you are on a steep hill, be especially ca
Preparation
Applies to: vehicles with tire mobility kit
Read and follow the important safety precautions.
Set the parking brake.
Select the "P" selector lever position.
Check if a repair with the
Removing
- Tape off the B-pillar in the door arrester area using adhesive
tape, so that the paint will not be damaged.
- Move the door window into the "closed" position.
- Remove the rear door trim panel. Refer to
→ Body Interior; Rep. Gr.70; Rear Door Trim Panels;
WARNING
After every removal and installation of the Airbag
Control Module -J234-, the "inertial sensor basic
setting" must be performed.
If the Airbag Control Module -J234- is replaced with a
new part, the basic setting is performed when
implementing the "15 - Replace airbag control