Audi A4: Interior lighting
Front interior lighting
Fig. 45 Headliner: front interior lighting
Interior lighting buttons
- Interior lighting on/off
- Door contact switch on/off.
The interior lighting
is controlled automatically.
Touch-sensitive reading lights
- To turn a reading light on or off, touch the surface (1)
briefly.
- To activate the manual dimming function,
touch the surface (1) when the light is switched
off and keep touching it until the desired
brightness is reached.
Rear interior lighting
Fig. 46 Headliner: rear reading lights
Reading lights
- To switch the reading lamp on or off, press the
button 1.
- To activate the manual dimming function*,
touch the surface while the light is switched off
1 and keep touching it until
the desired
brightness is reached.
Interior lighting
Applies to: vehicles with interior lighting
The ambient lighting turns on when the ignition
is switched on. The O light switch position deactivates
the interior lighting.
You can adjust the ambient lighting separately.
The settings depend on the vehicle equipment.
- Applies to MMI: Select on the home screen: VEHICLE
> Light & Visibility > Interior lighting.
You can choose from various color profiles, such
as Maritime.
Additional settings and profiles:
- Brightness: you can adjust the brightness for
all of the interior lighting.
- Individual: you can adjust the brightness and
color of the interior lighting separately, divided
into contour and surface lighting.
- Audi drive select: the contour and surface
lighting color changes depending on the selected
drive select mode.
Tips
Depending on vehicle equipment, when the
drive select* function is switched on, the color
of the contour and surface lighting may briefly
change to red or blue when the interior
temperature is manually increased or decreased.
Display brightness
You can set the instrument and display illumination
separately. The settings depend on the vehicle
equipment.
- Applies to MMI: select on the home screen:
SETTINGS > Display & brightness.
- Cockpit dimming
- Head-up display
- MMI
- Audi virtual cockpit
Instrument illumination
Fig. 47 Light switch: instrument illumination
- You can adjust the background
brightness of
the instruments and display illumination.
- Press the knob (1) to release it.
- Turn the knob toward "-" or "+" to reduce or increase
the brightness.
- Press the knob again to return it to its original
position.
Tips
Depending on vehicle equipment, the instrument
illumination (needles and gauges) may
turn on when the lights are off and the ignition
is switched on. The illumination for the
gauges reduces automatically and eventually
turns off as brightness outside increases. This
function reminds the driver to turn the low
beams on at the appropriate time.
READ NEXT:
Adjusting exterior mirrors
Fig. 48 Driver's door: knob for the exterior mirrors
Turn the knob in the driver's door to the desired
position:
0 - Deactivates all adjustment functions.
- Selects the le
Switching the windshield wipers on
Fig. 51 Lever: windshield wipers
Fig. 52 Lever: rear window wiper (allroad)
Move the lever to the
corresponding position:
(0) Windshield wipers off
(1) Rain sens
Switching the compass on and off
Applies to: vehicles with digital compass
Fig. 55 Rearview mirror: digital compass is switched on
To turn the compass on or off, press the button
(1) until the com
SEE MORE:
Headliner, Removing and Installing, Sedan
Special tools and workshop equipment required
Pry Lever -80-200-
Removal Wedge -T40233-
Omega Clip Tool -T40280-
Removing
WARNING
Risk of injury due to involuntary deployment.
Pay attention to the safety precautions when working
with pyrotechn
Fig. 161 Motor compartment: cap on brake fluid reservoir
Observe the safety precautions General
information.
Checking the brake fluid level
The brake fluid reservoir is located under a cover
on the driver's side.
Park the vehicle on a level surface.
Lift the cover fig. 158 at both
openings and