Audi A4: Special Tools
Special tools and workshop equipment required
- Analog/Digital Multimeter -FLU83III-

- Puller - Bevel Gear -T10474-

- Torque Wrench 1332 40-200Nm -VAG1332-
- Inner Hex Socket 8 mm or TORX T50

- Battery Charger -VAS5095A-

- Battery Tester with Printer -VAS5097A-

- Battery Charger -VAS5900-

- Battery Charger -VAS5903-

- Battery Charger -VAS5906-

- Solar Battery Maintainer -VAS6102A-


- Generator Belt Socket -3310-

- Multi-Tooth Adapter -3400-

READ NEXT:
Washer Fluid Hoses
Washer Fluid Line Hose Connections, Disconnecting and Connecting
Various hose couplings are used to connect the hoses to the
washer fluid pumps and spray jets or as coupling points
HID Headlamp Usage and Safety Precautions
Never replace bulbs if you are not familiar with the
procedures, safety precautions and tools.
WARNING
Danger to life due to high voltage.
For wor
SEE MORE:
Note
In the case of vehicles on which the refrigerant lines have
no threads for connection of Adapter Set -1785-. Use for example
a flushing gun with rubber end piece or an adapter from the
Refrigerant Circuits Adapter Set 1 -VAS6338/1- for blowing
through the individual components. Wh
The condenser conducts heat from compressed refrigerant gas
to the ambient air.
This condenses the refrigerant gas to fluid.
Note
Depending on the version of the refrigerant circuit, the
receiver/dryer is installed (integrated) either on the condenser
or inside the condenser. Refer to