General Information
The anti-theft immobilizer system control module can
depending on the vehicle be integrated in the following systems:
Instrument Cluster Control Module -J285-
Comfort System Ce
Trailer Hitch Socket, Removing and Installing - Version 1
Removing
- Turn off the ignition and remove the key.
- Remove the bolts -arrows-.
- Detach the socket from the retaining plate.
General Information
The support mode provides the vehicle electrical system with
voltage when the Battery -A- is removed or disconnected.
For more information. Refer to the Battery Charger -VAS5900-
Operating Instructions.
The support mode is used for the following situations:
Vehicle electrical
Special tools and workshop equipment required
Vehicle Diagnostic Tester
The airbag control module must be replaced
If the display "Control module faulty" appears after checking
the DTC memory
After three side/ driver/ front passenger airbag or belt
tensioner deployments
If housing is damage