Audi A4: Antenna Systems
- Overview - Antenna Systems
- Component Location Overview - Antenna Systems
- Antenna Amplifier, Removing and Installing
- TV Antenna Amplifier 1 -R82-, Removing and Installing, Sedan
- Windshield Antenna Suppression Filter -C18-, Removing and Installing
- Emergency Module Antenna, Removing and Installing
READ NEXT:
Overview - Antenna Systems
Overview - Antenna Systems, Sedan, USA
The antenna systems consist of window antennas, a Roof
Antenna - R216- and bumper antennas.
Window Antennas
Antenna -R11- (AM/FM1)/TV Antenna 1 -R55- (TV1) to
Component Location Overview - Antenna Systems
Component Location Overview - Antenna Systems, Sedan, USA
1 - Antenna Amplifier -R24-
Removing and Installing. Refer to
→ Chapter "Antenna Amplifier -R24-, Removing and Installing
Antenna Amplifier, Removing and Installing
Antenna Amplifier -R24-, Removing and Installing, Sedan
The Antenna Amplifier -R24- is located on the upper right of
the D-pillar.
Removing
- Turn off the ignition and all electrical equipment a
SEE MORE:
General Information
High pressure side are the condenser, receiver/dryer and
restrictor or expansion valve to separate the high and low
pressure liquid ends.
High pressure results from the restrictor or expansion valve
forming a constriction and causing the refrigerant to
accumulate, thus leading to an increase in
Hydraulic Pressure Sensor 1 -G545- and Hydraulic Pressure Sensor 2 -G546-,
Removing and Installing
Note
The Mechatronic remains installed.
WARNING
The system is under pressure.
The electronic ATF pump must be deactivated every
time before opening the transmission, and the hydraulic
pressure reservoir is drained.
Refer to
→ Chapter "ATF Pump, Deactivating and Draining
© 2019-2026 Copyright www.audia4b9.com
